Development of a test bed for high-speed power line communications

C. K. Lim; P. L. So; E. Gunawan; S. Chen; T. T. Lie; Y. L. Guan

doi:10.1109/ICPST.2000.900099

Development of a test bed for high-speed power line communications

C. K. Lim, P. L. So, E. Gunawan, S. Chen, T. T. Lie, Y. L. Guan

Nanyang Technological University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

9 Citations (Scopus)

Abstract

This paper presents the development of a power line test bed which provides a platform to simulate the 230V power line environment in a controlled and reproducible manner. The target is to communicate data reliably over power lines at speeds of at least 1 Mbits/s with frequency ranging from 1MHz to 10MHz. This test bed is integrated with a power line communication channel, power line couplers, loads and impairment devices for worst case environment simulation. A method for coupling the high-frequency signal onto and from the power line is discussed. The design of digital filters for transceivers using advanced digital signal processing techniques is presented. The digital filters are used to amplify, condition and recover the high-frequency signals which have been attenuated and corrupted by noise at the channel.

Original language	English
Title of host publication	PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings
Editors	Kit Po Wong, Bob Stewart, Xiaoxin Zhou, Qi Su
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	451-456
Number of pages	6
ISBN (Electronic)	0780363388, 9780780363380
DOIs	https://doi.org/10.1109/ICPST.2000.900099
Publication status	Published - 2000
Externally published	Yes
Event	International Conference on Power System Technology, PowerCon 2000 - Perth, Australia Duration: Dec 4 2000 → Dec 7 2000

Publication series

Name	PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings
Volume	1

Conference

Conference	International Conference on Power System Technology, PowerCon 2000
Country/Territory	Australia
City	Perth
Period	12/4/00 → 12/7/00

Bibliographical note

Publisher Copyright:
© 2000 IEEE.

ASJC Scopus Subject Areas

Energy Engineering and Power Technology
Electrical and Electronic Engineering

Keywords

Coupling circuits
Digital filters
Impairment devices
Power line platform
Transceivers

Access to Document

10.1109/ICPST.2000.900099

Cite this

Lim, C. K., So, P. L., Gunawan, E., Chen, S., Lie, T. T., & Guan, Y. L. (2000). Development of a test bed for high-speed power line communications. In K. P. Wong, B. Stewart, X. Zhou, & Q. Su (Eds.), PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings (pp. 451-456). Article 900099 (PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings; Vol. 1). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICPST.2000.900099

Lim, C. K. ; So, P. L. ; Gunawan, E. et al. / Development of a test bed for high-speed power line communications. PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings. editor / Kit Po Wong ; Bob Stewart ; Xiaoxin Zhou ; Qi Su. Institute of Electrical and Electronics Engineers Inc., 2000. pp. 451-456 (PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings).

@inproceedings{99068a2cabf74dbe9d05b92382596b5a,

title = "Development of a test bed for high-speed power line communications",

abstract = "This paper presents the development of a power line test bed which provides a platform to simulate the 230V power line environment in a controlled and reproducible manner. The target is to communicate data reliably over power lines at speeds of at least 1 Mbits/s with frequency ranging from 1MHz to 10MHz. This test bed is integrated with a power line communication channel, power line couplers, loads and impairment devices for worst case environment simulation. A method for coupling the high-frequency signal onto and from the power line is discussed. The design of digital filters for transceivers using advanced digital signal processing techniques is presented. The digital filters are used to amplify, condition and recover the high-frequency signals which have been attenuated and corrupted by noise at the channel.",

keywords = "Coupling circuits, Digital filters, Impairment devices, Power line platform, Transceivers",

author = "Lim, {C. K.} and So, {P. L.} and E. Gunawan and S. Chen and Lie, {T. T.} and Guan, {Y. L.}",

note = "Publisher Copyright: {\textcopyright} 2000 IEEE.; International Conference on Power System Technology, PowerCon 2000 ; Conference date: 04-12-2000 Through 07-12-2000",

year = "2000",

doi = "10.1109/ICPST.2000.900099",

language = "English",

series = "PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "451--456",

editor = "Wong, {Kit Po} and Bob Stewart and Xiaoxin Zhou and Qi Su",

booktitle = "PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings",

address = "United States",

}

Lim, CK, So, PL, Gunawan, E, Chen, S, Lie, TT & Guan, YL 2000, Development of a test bed for high-speed power line communications. in KP Wong, B Stewart, X Zhou & Q Su (eds), PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings., 900099, PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings, vol. 1, Institute of Electrical and Electronics Engineers Inc., pp. 451-456, International Conference on Power System Technology, PowerCon 2000, Perth, Australia, 12/4/00. https://doi.org/10.1109/ICPST.2000.900099

Development of a test bed for high-speed power line communications. / Lim, C. K.; So, P. L.; Gunawan, E. et al.
PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings. ed. / Kit Po Wong; Bob Stewart; Xiaoxin Zhou; Qi Su. Institute of Electrical and Electronics Engineers Inc., 2000. p. 451-456 900099 (PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings; Vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Development of a test bed for high-speed power line communications

AU - Lim, C. K.

AU - So, P. L.

AU - Gunawan, E.

AU - Chen, S.

AU - Lie, T. T.

AU - Guan, Y. L.

PY - 2000

Y1 - 2000

N2 - This paper presents the development of a power line test bed which provides a platform to simulate the 230V power line environment in a controlled and reproducible manner. The target is to communicate data reliably over power lines at speeds of at least 1 Mbits/s with frequency ranging from 1MHz to 10MHz. This test bed is integrated with a power line communication channel, power line couplers, loads and impairment devices for worst case environment simulation. A method for coupling the high-frequency signal onto and from the power line is discussed. The design of digital filters for transceivers using advanced digital signal processing techniques is presented. The digital filters are used to amplify, condition and recover the high-frequency signals which have been attenuated and corrupted by noise at the channel.

AB - This paper presents the development of a power line test bed which provides a platform to simulate the 230V power line environment in a controlled and reproducible manner. The target is to communicate data reliably over power lines at speeds of at least 1 Mbits/s with frequency ranging from 1MHz to 10MHz. This test bed is integrated with a power line communication channel, power line couplers, loads and impairment devices for worst case environment simulation. A method for coupling the high-frequency signal onto and from the power line is discussed. The design of digital filters for transceivers using advanced digital signal processing techniques is presented. The digital filters are used to amplify, condition and recover the high-frequency signals which have been attenuated and corrupted by noise at the channel.

KW - Coupling circuits

KW - Digital filters

KW - Impairment devices

KW - Power line platform

KW - Transceivers

UR - http://www.scopus.com/inward/record.url?scp=0013106392&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0013106392&partnerID=8YFLogxK

U2 - 10.1109/ICPST.2000.900099

DO - 10.1109/ICPST.2000.900099

M3 - Conference contribution

AN - SCOPUS:0013106392

T3 - PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings

SP - 451

EP - 456

BT - PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings

A2 - Wong, Kit Po

A2 - Stewart, Bob

A2 - Zhou, Xiaoxin

A2 - Su, Qi

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - International Conference on Power System Technology, PowerCon 2000

Y2 - 4 December 2000 through 7 December 2000

ER -

Lim CK, So PL, Gunawan E, Chen S, Lie TT, Guan YL. Development of a test bed for high-speed power line communications. In Wong KP, Stewart B, Zhou X, Su Q, editors, PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings. Institute of Electrical and Electronics Engineers Inc. 2000. p. 451-456. 900099. (PowerCon 2000 - 2000 International Conference on Power System Technology, Proceedings). doi: 10.1109/ICPST.2000.900099

Development of a test bed for high-speed power line communications

Abstract

Publication series

Conference

Bibliographical note

ASJC Scopus Subject Areas

Keywords

Access to Document

Other files and links

Fingerprint

Cite this