Field emission from nitrogen doped tetrahedral amorphous carbon prepared by filtered cathodic vacuum arc technique

L. K. Cheah*, X. Shi, B. K. Tay, Z. Sun

*Corresponding author for this work

Research output: Contribution to conferencePaperpeer-review

Abstract

The study of field emission property on nitrogen doped tetrahedral amorphous carbon (ta-C:N) prepared by filtered cathodic vacuum arc, (FCVA) technique is reported. Field emission from ta-C:N coated on Si substrate was investigated by `plane-to-plane' configuration at room temperature and base pressure of 2.0×10-6 torr. A comparison of the field emission characteristics for various nitrogen flow rate showed significant shifts in J-E curves towards low potential side with the increasing of nitrogen flow rate. The lowest onset field obtained was 10 V/μm. The current density of 0.1 mAmm-2 (assuming the entire film surface is emitting) at 50 μm-1 was obtained from these film. Electronic parameters, i.e., band gap energy and activation energy were measured in order to construct a energy band diagram for the heterojunction structure and the field emission mechanism is proposed based on this structure.

Original languageEnglish
Pages112-116
Number of pages5
Publication statusPublished - 1997
Externally publishedYes
EventProceedings of the 1997 10th International Vacuum Microelectronics Conference, IVMC'97 - Kyongju, Korea
Duration: Aug 17 1997Aug 21 1997

Conference

ConferenceProceedings of the 1997 10th International Vacuum Microelectronics Conference, IVMC'97
CityKyongju, Korea
Period8/17/978/21/97

ASJC Scopus Subject Areas

  • Surfaces and Interfaces

Fingerprint

Dive into the research topics of 'Field emission from nitrogen doped tetrahedral amorphous carbon prepared by filtered cathodic vacuum arc technique'. Together they form a unique fingerprint.

Cite this