Sintering and Densification (I)—Conventional Sintering Technologies

Ling Bing Kong; Yizhong Huang; Wenxiu Que; Tianshu Zhang; Sean Li; Jian Zhang; Zhili Dong; Dingyuan Tang

doi:10.1007/978-3-319-18956-7_5

Sintering and Densification (I)—Conventional Sintering Technologies

Ling Bing Kong^*, Yizhong Huang, Wenxiu Que, Tianshu Zhang, Sean Li, Jian Zhang, Zhili Dong, Dingyuan Tang

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Chapter

9 Citations (Scopus)

Abstract

It is well known that, to produce ceramics, green bodies must be sintered at a certain high temperature for a given time duration to develop required microstructure and thus desired properties. In particular, transparent ceramics must be fully dense to achieve maximum optical transmittance. Sintering process is governed by a number of parameters, which can be used to build up interrelationships among processing, microstructure, properties, and performance. Sintering behavior and microstructure development have been extensively studied. Qualitative understandings include driving forces of sintering, the mechanisms of densification, controlling factors, such as particle size of precursor powders, sintering temperature, time duration and applied pressure, electrical current, and so on. This chapter serves to cover the fundamental issues of the conventional sintering technologies.

Original language	English
Title of host publication	Topics in Mining, Metallurgy and Materials Engineering
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	291-394
Number of pages	104
DOIs	https://doi.org/10.1007/978-3-319-18956-7_5
Publication status	Published - 2015
Externally published	Yes

Publication series

Name	Topics in Mining, Metallurgy and Materials Engineering
ISSN (Print)	2364-3293
ISSN (Electronic)	2364-3307

Bibliographical note

Publisher Copyright:
© 2015, Springer International Publishing Switzerland.

ASJC Scopus Subject Areas

Materials Science (miscellaneous)
Mechanical Engineering
Industrial and Manufacturing Engineering
Metals and Alloys

Keywords

Driving Force
Grain Shape Accommodation
Liquid Phase Sintering
Matter Transport
Sintering Equation

Access to Document

10.1007/978-3-319-18956-7_5

Cite this

Kong, L. B., Huang, Y., Que, W., Zhang, T., Li, S., Zhang, J., Dong, Z., & Tang, D. (2015). Sintering and Densification (I)—Conventional Sintering Technologies. In Topics in Mining, Metallurgy and Materials Engineering (pp. 291-394). (Topics in Mining, Metallurgy and Materials Engineering). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-319-18956-7_5

@inbook{b5ab90a56faa4a0aac1df1671074e771,

title = "Sintering and Densification (I)—Conventional Sintering Technologies",

abstract = "It is well known that, to produce ceramics, green bodies must be sintered at a certain high temperature for a given time duration to develop required microstructure and thus desired properties. In particular, transparent ceramics must be fully dense to achieve maximum optical transmittance. Sintering process is governed by a number of parameters, which can be used to build up interrelationships among processing, microstructure, properties, and performance. Sintering behavior and microstructure development have been extensively studied. Qualitative understandings include driving forces of sintering, the mechanisms of densification, controlling factors, such as particle size of precursor powders, sintering temperature, time duration and applied pressure, electrical current, and so on. This chapter serves to cover the fundamental issues of the conventional sintering technologies.",

keywords = "Driving Force, Grain Shape Accommodation, Liquid Phase Sintering, Matter Transport, Sintering Equation",

author = "Kong, \{Ling Bing\} and Yizhong Huang and Wenxiu Que and Tianshu Zhang and Sean Li and Jian Zhang and Zhili Dong and Dingyuan Tang",

note = "Publisher Copyright: {\textcopyright} 2015, Springer International Publishing Switzerland.",

year = "2015",

doi = "10.1007/978-3-319-18956-7\_5",

language = "English",

series = "Topics in Mining, Metallurgy and Materials Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "291--394",

booktitle = "Topics in Mining, Metallurgy and Materials Engineering",

address = "Germany",

}

Kong, LB, Huang, Y, Que, W, Zhang, T, Li, S, Zhang, J, Dong, Z & Tang, D 2015, Sintering and Densification (I)—Conventional Sintering Technologies. in Topics in Mining, Metallurgy and Materials Engineering. Topics in Mining, Metallurgy and Materials Engineering, Springer Science and Business Media Deutschland GmbH, pp. 291-394. https://doi.org/10.1007/978-3-319-18956-7_5

Sintering and Densification (I)—Conventional Sintering Technologies. / Kong, Ling Bing; Huang, Yizhong; Que, Wenxiu et al.
Topics in Mining, Metallurgy and Materials Engineering. Springer Science and Business Media Deutschland GmbH, 2015. p. 291-394 (Topics in Mining, Metallurgy and Materials Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Chapter

TY - CHAP

T1 - Sintering and Densification (I)—Conventional Sintering Technologies

AU - Kong, Ling Bing

AU - Huang, Yizhong

AU - Que, Wenxiu

AU - Zhang, Tianshu

AU - Li, Sean

AU - Zhang, Jian

AU - Dong, Zhili

AU - Tang, Dingyuan

PY - 2015

Y1 - 2015

N2 - It is well known that, to produce ceramics, green bodies must be sintered at a certain high temperature for a given time duration to develop required microstructure and thus desired properties. In particular, transparent ceramics must be fully dense to achieve maximum optical transmittance. Sintering process is governed by a number of parameters, which can be used to build up interrelationships among processing, microstructure, properties, and performance. Sintering behavior and microstructure development have been extensively studied. Qualitative understandings include driving forces of sintering, the mechanisms of densification, controlling factors, such as particle size of precursor powders, sintering temperature, time duration and applied pressure, electrical current, and so on. This chapter serves to cover the fundamental issues of the conventional sintering technologies.

AB - It is well known that, to produce ceramics, green bodies must be sintered at a certain high temperature for a given time duration to develop required microstructure and thus desired properties. In particular, transparent ceramics must be fully dense to achieve maximum optical transmittance. Sintering process is governed by a number of parameters, which can be used to build up interrelationships among processing, microstructure, properties, and performance. Sintering behavior and microstructure development have been extensively studied. Qualitative understandings include driving forces of sintering, the mechanisms of densification, controlling factors, such as particle size of precursor powders, sintering temperature, time duration and applied pressure, electrical current, and so on. This chapter serves to cover the fundamental issues of the conventional sintering technologies.

KW - Driving Force

KW - Grain Shape Accommodation

KW - Liquid Phase Sintering

KW - Matter Transport

KW - Sintering Equation

UR - http://www.scopus.com/inward/record.url?scp=85103910598&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85103910598&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-18956-7_5

DO - 10.1007/978-3-319-18956-7_5

M3 - Chapter

AN - SCOPUS:85103910598

T3 - Topics in Mining, Metallurgy and Materials Engineering

SP - 291

EP - 394

BT - Topics in Mining, Metallurgy and Materials Engineering

PB - Springer Science and Business Media Deutschland GmbH

ER -

Sintering and Densification (I)—Conventional Sintering Technologies

Abstract

Publication series

Bibliographical note

ASJC Scopus Subject Areas

Keywords

Access to Document

Other files and links

Fingerprint

Cite this