State-of-the-art review on selective laser melting of non-ferrous metals

C. Y. Yap; C. K. Chua; Z. L. Dong; Z. H. Liu; D. Q. Zhang

doi:10.3850/978-981-09-0446-3_035

State-of-the-art review on selective laser melting of non-ferrous metals

C. Y. Yap, C. K. Chua, Z. L. Dong, Z. H. Liu, D. Q. Zhang

Nanyang Technological University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

8 Citations (Scopus)

Abstract

In the field of Additive Manufacturing (AM), Rapid Prototyping (RP) or 3D Printing, there is an increasing research interest in Selective Laser Melting (SLM) in the past few years. This review focuses on the SLM of non-ferrous metals such as titanium, nickel, aluminium and other metals. Besides discussing the materials that have been tested for SLM, it also tabulates the various mechanical properties reported in research publications for readers to have a good overview of the current research on this technology.

Original language	English
Title of host publication	Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014
Editors	Chee Kai Chua, Wai Yee Yeong, Ming Jen Tan, Erjia Liu
Publisher	Pro-AM
Pages	193-201
Number of pages	9
ISBN (Electronic)	9789810904463
DOIs	https://doi.org/10.3850/978-981-09-0446-3_035
Publication status	Published - 2014
Externally published	Yes

Publication series

Name	Proceedings of the International Conference on Progress in Additive Manufacturing
Volume	0
ISSN (Print)	2424-8967

Bibliographical note

Publisher Copyright:
© Copyright 2014 by Research Publishing Services.

ASJC Scopus Subject Areas

Industrial and Manufacturing Engineering

Access to Document

10.3850/978-981-09-0446-3_035

Cite this

Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., & Zhang, D. Q. (2014). State-of-the-art review on selective laser melting of non-ferrous metals. In C. K. Chua, W. Y. Yeong, M. J. Tan, & E. Liu (Eds.), Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014 (pp. 193-201). (Proceedings of the International Conference on Progress in Additive Manufacturing; Vol. 0). Pro-AM. https://doi.org/10.3850/978-981-09-0446-3_035

Yap, C. Y. ; Chua, C. K. ; Dong, Z. L. et al. / State-of-the-art review on selective laser melting of non-ferrous metals. Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014. editor / Chee Kai Chua ; Wai Yee Yeong ; Ming Jen Tan ; Erjia Liu. Pro-AM, 2014. pp. 193-201 (Proceedings of the International Conference on Progress in Additive Manufacturing).

@inproceedings{8c5302724bc0489bb2b9c771ec8375e9,

title = "State-of-the-art review on selective laser melting of non-ferrous metals",

abstract = "In the field of Additive Manufacturing (AM), Rapid Prototyping (RP) or 3D Printing, there is an increasing research interest in Selective Laser Melting (SLM) in the past few years. This review focuses on the SLM of non-ferrous metals such as titanium, nickel, aluminium and other metals. Besides discussing the materials that have been tested for SLM, it also tabulates the various mechanical properties reported in research publications for readers to have a good overview of the current research on this technology.",

author = "Yap, {C. Y.} and Chua, {C. K.} and Dong, {Z. L.} and Liu, {Z. H.} and Zhang, {D. Q.}",

year = "2014",

doi = "10.3850/978-981-09-0446-3_035",

language = "English",

series = "Proceedings of the International Conference on Progress in Additive Manufacturing",

publisher = "Pro-AM",

pages = "193--201",

editor = "Chua, {Chee Kai} and Yeong, {Wai Yee} and Tan, {Ming Jen} and Erjia Liu",

booktitle = "Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014",

}

Yap, CY, Chua, CK, Dong, ZL, Liu, ZH & Zhang, DQ 2014, State-of-the-art review on selective laser melting of non-ferrous metals. in CK Chua, WY Yeong, MJ Tan & E Liu (eds), Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014. Proceedings of the International Conference on Progress in Additive Manufacturing, vol. 0, Pro-AM, pp. 193-201. https://doi.org/10.3850/978-981-09-0446-3_035

State-of-the-art review on selective laser melting of non-ferrous metals. / Yap, C. Y.; Chua, C. K.; Dong, Z. L. et al.
Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014. ed. / Chee Kai Chua; Wai Yee Yeong; Ming Jen Tan; Erjia Liu. Pro-AM, 2014. p. 193-201 (Proceedings of the International Conference on Progress in Additive Manufacturing; Vol. 0).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - State-of-the-art review on selective laser melting of non-ferrous metals

AU - Yap, C. Y.

AU - Chua, C. K.

AU - Dong, Z. L.

AU - Liu, Z. H.

AU - Zhang, D. Q.

PY - 2014

Y1 - 2014

N2 - In the field of Additive Manufacturing (AM), Rapid Prototyping (RP) or 3D Printing, there is an increasing research interest in Selective Laser Melting (SLM) in the past few years. This review focuses on the SLM of non-ferrous metals such as titanium, nickel, aluminium and other metals. Besides discussing the materials that have been tested for SLM, it also tabulates the various mechanical properties reported in research publications for readers to have a good overview of the current research on this technology.

AB - In the field of Additive Manufacturing (AM), Rapid Prototyping (RP) or 3D Printing, there is an increasing research interest in Selective Laser Melting (SLM) in the past few years. This review focuses on the SLM of non-ferrous metals such as titanium, nickel, aluminium and other metals. Besides discussing the materials that have been tested for SLM, it also tabulates the various mechanical properties reported in research publications for readers to have a good overview of the current research on this technology.

UR - http://www.scopus.com/inward/record.url?scp=84977879583&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84977879583&partnerID=8YFLogxK

U2 - 10.3850/978-981-09-0446-3_035

DO - 10.3850/978-981-09-0446-3_035

M3 - Conference contribution

AN - SCOPUS:84977879583

T3 - Proceedings of the International Conference on Progress in Additive Manufacturing

SP - 193

EP - 201

BT - Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014

A2 - Chua, Chee Kai

A2 - Yeong, Wai Yee

A2 - Tan, Ming Jen

A2 - Liu, Erjia

PB - Pro-AM

ER -

Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ. State-of-the-art review on selective laser melting of non-ferrous metals. In Chua CK, Yeong WY, Tan MJ, Liu E, editors, Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Pro-AM 2014. Pro-AM. 2014. p. 193-201. (Proceedings of the International Conference on Progress in Additive Manufacturing). doi: 10.3850/978-981-09-0446-3_035

State-of-the-art review on selective laser melting of non-ferrous metals

Abstract

Publication series

Bibliographical note

ASJC Scopus Subject Areas

Access to Document

Other files and links

Fingerprint

Cite this